CarPro Iron X
I've been using Iron X from CarPro since I can remember. It was the first ever iron remover I came accross and has never let me down. You'll find that most iron removers contain the same chemicals with some adding fragrances to cover up the "rotten egg smell".
Iron X is a key part in my paint decontamination procedure as if iron particle are left in the paint during the correction step, they will lift and get stuck in your polihsing pads, creating hazing and preventing you from creating that perfect finish.
The most important feature of Iron X is that it sits at PH-7 and is safe to use on paint, chrome, glass, plastic and alloy wheels.
CarPro's Iron X is my pick of all the iron removers as its readily available and the price is very reasonable compared to the likes of P&S etc.
Highly effective, acid-free and pH balanced (6~7pH) car paint, wheels & glass cleaner (safe for all wheels including Aluminum/Chromes/Anodized and alloys). This formulation is also effective and safe for use on all car surfaces and will not deteriorate clear coats. This preventative measure puts a stop to corrosion, IronX contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as IronX. The IronX Paint and wheels Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying!! If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The IronX is designed to remove what lies below the paint surface as well as above.
Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers or paint’s pin-holes. This is a gradual process that often is not evident until it's too late. Claying does not remove the entire particle which will continue to spread beneath the surface if not dissolved.
During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint, rims and wheels due to the high temperature conditions they are normally exposed. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. IronX opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.
IronX sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple/ red. The purple/red coloration is the IronX Cleaner forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation. Rinse car paint and wheels thoroughly with a power washer and wipe dry.
- Begin the iron removal process after your initial decon wash with GSF and GS.
- Shake the Iron X well to make sure it is well mixed.
- Spray on and wait 3-5 min, while contaminants change color to purple-red.
- Rub in with damp soft sponge. Avoid drying in direct sunlight.
- Rinse well with water.
